GODIAG GT100 OBDII Protocol Detector OBD2 Break Out Box ECU Connector

Highlights for GT100 ECU connector:

1. It is the latest testing platform for OBDII protocol communication detection and ECU maintenance/diagnosis /programming /coding.
2. It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
3. Able to connect the single modules or multiple modules of the vehicle.
4. It can be connected with any diagnostic tool to tell whether the car communication is good or not.
5. Can work with most device to do test, will make your operation much easier , such as xhorse vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.
6. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost,automatically locked,the key remote control fails and the fault light turns on.
7. Can support all key lost, activate the meter and wake up the anti-theft module.
   (1) for Porsche, VW 4th generation smart key &5th generation card key (models such as: new A6L Touareg A4 Q5 A7), use GT100 short the banana PIN 16—-PIN 1, After the instrument is on, the key matching tool connects to GT100+ female Head for data collection. Some vehicle instruments are not bright, but data can also be collected, for example: A6L Q7.
   (2) Can replace the engine ECU for Toyota; and Support onnect short-circuit PIN13-PIN4 with Key Programmer when do all key lost for Toyota.
   (3) Mitsubishi all key lost matching or all key lost for remote control key, need to set OBDII short-circuit PIN1-PIN4.
8.  With  BMW CAS4 & CAS4+ Test Platform and BMW FEM/BDC test platform, GT100 can work with Xhorse VVDI2/Lonsdor K518/CGDI/Autel im608 to Support Off-site Key Programming/All Keys Lost/ Add New Key.